Diese Seite in deutsch

The perfect solution for Simple, Reliable and Affordable data protection IDE+SATA RAID Controllers EzRaid provides real time data mirroring

IDE + SATA RAID Controllers, Disk Copy Solutions, Backup Solutions!

Data Protection Solutions by Arco specializes in affordable and easy to use drive to drive (D2D) RAID 1 disk mirroring and hard drive copier hardware as well as data backup hardware and software products. All products are designed on the foundation of the patented DupliDisk technology. The DD4 products provide RAID 1 disk mirroring for continuous data protection of your SATA drives. The products come in a variety of form factors. Each was designed to accommodate a particular user need in terms of where it can be placed within the computer. All products connect via SATA cables to two hard drives in your computer. All data saves are sent to both drives concurrently. If one of the drives fails, an alarm sounds and the remaining drive seamlessly takes over all operations, keeping the system up and running. All products provide an audible failure alarm and optional remote monitoring capability. The Bay Mount, EzRAID Dual Swap (dual caddy) and eSATA RAID units provide front panel status information. The DD3 products offer RAID 1 disk mirroring for continuous data protection of your IDE drives. The products come in a variety of form factors. Each was designed to accommodate a particular user need in terms of where it can be placed within the computer. All products connect via IDE cables to two hard drives in your computer. All data saves are sent to both drives concurrently. If one of the drives fails, an alarm sounds and the remaining drive seamlessly takes over all operations, keeping the system up and running. All products provide an audible failure alarm and optional remote monitoring capability. The Bay Mount, MicroRAID and the dual caddy EzRAID and RAIDcase units provide front panel status information. Download the product manual you need.

Serial ATA Controllers - DD4 (for use with SATA drives)
EzRaid DD4 3.5" Bay Mount The EzRaid™ DD4 3.5"Bay Mount unit allows you to quickly and easily set up a (RAID 1) disk mirroring system on your computer using Serial ATA (SATA) drives. Installing the 3.5" Bay Mount is a simple matter of slipping it into an available 3.5" drive bay then using the provided cables to connect your drives to the unit and the unit to your motherboard. Run the provided software to establish the mirror and you're done. No need for special drivers, no interrupt or software conflicts!
EzRaid DD4 5.25" Bay Mount The EzRaid™ DD4 5.25" Bay Mount unit allows you to quickly and easily set up a (RAID 1) disk mirroring system on your computer using Serial ATA (SATA) drives.
EzRaid DD4 Dual Swap+ Der EzRaid™Dual Swap+ unit allows you to quickly and easily set up a RAID 1 disk mirroring system on your computer using Serial ATA (SATA) drives. Whatever you save to one drive is concurrently sent to the second so you always have an up to the minute copy of your hard drive. If one drive fails, the other takes over automatically and keeps you up and running.
SATA FlexMount The SATA FlexMount packs all the power and functionality of our larger DD4 hardware RAID 1 disk mirroring controllers into a compact design, about the size of a pack of playing cards. The SATA FlexMount can literally fit anywhere inside your computer. It does not take up a slot or bay and is ideal where space is at a premium. An optional use PCI slot bracket and cable (shown above) is included with the unit and provides a serial port, status lights, and an alarm-reset button.
eSATA Raid+ The EzRaid™Dual Swap+ unit allows you to quickly and easily set up a RAID 1 disk mirroring system on your computer using Serial ATA (SATA) drives. Whatever you save to one drive is concurrently sent to the second so you always have an up to the minute copy of your hard drive. If one drive fails, the other takes over automatically and keeps you up and running.
Parallel ATA Controllers - DD3 (for use with IDE drives)
3,5" BayMount Up-front protection. Our Bay Mount IDE Disk Mirroring RAID Controller, featuring DupliDisk3 technology (DD3), slides perfectly into any standard 3.5" floppy bay. The perfect solution for mirroring two IDE drives where no PCI slots are available. Slide the Bay Mount in place and connect your drives – your motherboard will do the rest.
5,25" BayMount The DD3 5.25 " Bay Mount unit allows you to quickly and easily set up an IDE RAID 1 disk mirroring system on your computer using two IDE drives. Installing the 5.25 " Bay Mount is a simple matter of slipping it into an available 5.25 " drive bay then using the provided cables to connect your drives to the unit and the unit to your motherboard. Run the provided software to establish the mirror and you're done. No need for special drivers, no interrupt or software conflicts!
FlexMount The SATA FlexMount packs all the power and functionality of our larger IDE hardware RAID 1 disk mirroring controllers into a compact design, about the size of a pack of playing cards. The FlexMount can literally fit anywhere inside your computer. It does not take up a slot or bay and is ideal where space is at a premium.
MicroRAID The EzRAID MicroRAID allows even those users with extreme space constraints to enjoy the benefits of our complete RAID1 disk mirroring hardware solution. The MicroRAID is the perfect answer for small box computer systems, such as point of sale (POS), where space is at a premium.
EzRAID EzRAID allows anyone to perform RAID1 data mirroring of a hard drive quickly and easily with the turn of a key. A true hardware solution, EzRAID requires no software to be installed on your machine. Just plug it in and it works. All RAID functions can be performed from the unit’s buttons and front panel LCD’s. Optional software utility is included for Linux or Windows OS.
RAIDcase The RAIDcase offers IDE hardware disk mirroring in an device that's both easy to install and easy to use. Ensure continuous data backup and eliminate potential downtime. DPS-Arco's advanced power and bus management allow you to hot-swap drives and the RAIDcase's two removable drive caddies make drive replacement a snap.
NoSlot The NoSlot is perfect for adding hardware RAID 1 disk mirroring to custom designed PC systems where the lack of a free bus slot or external drive bay--or extreme space restrictions--would normally make it impossible to add hardware RAID functionality. The uniquely simple design of the NoSlot allows it to mount directly to the computer chassis.
PCI Our PCI RAID 1 hardware disk mirroring controller mounts into any standard PCI slot. The PCI is perfect where there is no additional drive bay available. Simply drop the PCI into an available PCI bus slot, connect the supplied cables and you are ready to enjoy total data redundancy. The PCI provides back panel status lights, serial port and alarm reset.
DD3 ISA (Special Sale Item) The DD3 ISA RAID 1 disk mirroring controller mounts into any standard ISA slot and mirrors two IDE drives. Because the device uses the slot for power only and not for data transfer, it is not hampered by the normal speed limitations of ISA devices. It offers an ideal solution for industrial chassis and for mirroring IDE drives where there is no free PCI slot or drive bay available.
Disk Copy Solutions The EzCopy DD3 and DD4 are stand-alone hard drive copiers which require no connection to a computer. They perform fast and reliable hard disk duplication. Just insert your drives into the two removable drive caddies and push a button to initiate the drive copy. The DD3 duplicates IDE drives; the DD4 duplicates SATA drives.
EzCopy DD3 The EzCOPY is a stand-alone hard drive copier designed to simplify and speed up the job of copying your IDE hard disks. Duplicate your drives quickly and accurately with just the touch of a button. There's no need for software, no necessity to tie up a computer. Every copy is an exact bit by bit duplicate of your original.
EzCopy 2,5" The EzCopy 2.5 is a stand alone drive copier for 2.5" IDE drives. An easy to use drive duplicator, the EzCopy requires no connection to a computer so it doesn't tie up computer resources. The easy to read front panel LCD makes copy operations a snap. With no need for a computer, there's no need for software. You create an exact image of your source disk with the touch of a button! Every copy is a perfect bit by bit duplicate of your original.
EzCopy DD4 The EzCopy DD4 is the ideal disk drive copier solution for corporate IT professionals, system integrators, OEMs, lab testing environments, and service technicians. A stand alone drive duplicator for Serial ATA (SATA) drives, the EzCopy DD4 is small, fast and easy to use. It requires no connection to a computer so it doesn't tie up computer resources. It provides an exact image of the source disk with the touch of a button. An easy to read LCD makes its front panel operation a snap.
EzBackup D2D Solutions Our EzBackup line of drive to drive backup hardware and software is designed to automate regular backups and simplify the restore process. The initial backup procedure creates a mirror image of the source drive. Subsequent backups can be set up to backup only selected files or the entire drive. In either event, you always have an exact copy (as up to date as your last backup) of your hard drive. In the event of a disaster, you can quickly restore the entire drive or only selected files.
EzBackup® sa Create an exact image copy of your hard drive, including your operating system, applications, preferences, settings and data files. Or just backup certain files. The EzBackup®sa (Stand Alone) is the ideal backup accessory. By combining a fast external USB device with Data Protection Solutions' intuitive EzBackup software, we're able to deliver a fast, easy backup solution that virtually automates your backup chores.
EzBackup™ pd EzBackup™pd is the ideal backup accessory. By combining a fast external USB device with Data Protection Solutions' intuitive EzBackup software, we're able to deliver a fast, easy backup solution that virtually automates your backup chores.
EzBackup® USB 2.0 Enclosure This EzBackup USB 2.0 enclosure only comes with EzBackup software for all your backup and restore needs. Add your hard drive, then a simple USB connection, power cord insertion and a flip of the power switch and you're ready to go.
EzBackup™ pd Enclosure The EzBackup™pd is simply plug-n-play. Add your hard drive to the enclosure, then a simple USB connection, power cord insertion and a flip of the power switch and you're ready to go.